TPS92518QPWPRQ1

Texas Instruments
595-TPS92518QPWPRQ1
TPS92518QPWPRQ1

製造商：

說明：
LED照明驅動器IC 42-V automotive dual buck LED controller A 595-TPS92518QPWPTQ1

規格書:
ECAD模型:
下載免費的庫載入器，為ECAD工具轉換此文件。瞭解更多關於 ECAD 型號的資訊。

庫存量: 1,530

庫存：
1,530 可立即送貨
工廠前置作業時間：
18 週 工廠預計生產時間數量大於所顯示的數量。
最少： 1   多個： 1
單價:
NT$-.--
總價:
NT$-.--
估計關稅:
包裝:
完整捲（訂購多個2000）

Pricing (TWD)

數量 單價
總價
零卷 / MouseReel™ †
NT$115.92 NT$115.92
NT$87.12 NT$871.20
NT$79.92 NT$1,998.00
NT$72.00 NT$7,200.00
NT$68.04 NT$17,010.00
NT$65.88 NT$32,940.00
NT$64.08 NT$64,080.00
完整捲（訂購多個2000）
NT$61.92 NT$123,840.00
NT$60.84 NT$243,360.00
† NT$215.00 MouseReel™費用將加入您的購物車內並自動計算。所有MouseReel™訂單均不能取消和不能退換。 ↩

備用包裝

製造商 元件編號:
TPS92518QPWPTQ1
包裝:
Reel, Cut Tape, MouseReel
供貨情況:
庫存量
價格:
NT$136.44
最小值:
1

相似產品

Texas Instruments TPS92518QPWPTQ1
Texas Instruments
LED照明驅動器IC 42-V automotive dual buck LED controller A 595-TPS92518QPWPRQ1
與當前零件比較

商品屬性 屬性值 選擇屬性
Texas Instruments
產品類型: LED照明驅動器IC
RoHS:  
2 Output
Buck
5 A
HTSSOP-24
65 V
6.5 V
1 kHz to 2 MHz
Adjustable
TPS92518
- 40 C
+ 125 C
Brightness Control/Dimming, High Output Accuracy, Thermal Shutdown
AEC-Q100
Reel
Cut Tape
MouseReel
品牌: Texas Instruments
組裝國家: Not Available
擴散國: Not Available
原產國: TW, CN
開發套件: TPS92518EVM-878
輸入電壓: 6.5 V to 65 V
濕度敏感: Yes
安裝風格: SMD/SMT
通道數: 2 Channel
輸出類型: Constant Current
產品: LED Controllers
產品類型: LED Lighting Drivers
原廠包裝數量: 2000
子類別: Driver ICs
電源電流 - 最大值: 3 mA
類型: Automotive
每件重量: 154.500 mg
找到產品:
若要顯示類似商品，請選取至少一個核選方塊
至少選中以上一個核取方塊以顯示在此類別中類似的產品。
所選屬性: 0

規格書

Application Notes

Images

SPICE Models

Technical Resources

此功能需要啟用JavaScript。

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

TPS92518-Q1 Dual Buck LED Controllers

Texas Instruments TPS92518-Q1 Dual Buck LED Controllers come with an SPI communications interface. The serial communication interface provides a singular communication path for multichannel and platform lighting driver module (LDM) applications. The TPS92518-Q1 uses a quasi-hysteretic control method that supports switching frequencies ranging from 1kHz to 2MHz. This control method enables superior, high-frequency shunt FET dimming and also handles the demanding dynamic loads of adaptive LED matrix based headlamp systems. Software programmable SPI set points (Precision Peak Current, Controlled Off-Time and Output Voltage Sense) enables designers to develop a single LED driver solution for multiple load configurations that can be quickly reconfigured for future LED driver design requirements.

TPS92518 Dual Buck LED Controllers

Texas Instruments TPS92518 Dual Buck LED Controllers are dual-channel buck LED current controllers with an SPI communications interface. The serial communication interface provides a singular communication path for multichannel and platform lighting driver module (LDM) applications. The Texas Instruments TPS92518 uses a quasi-hysteretic control method that supports switching frequencies ranging from 1kHz to 2MHz. This control method enables superior, high-frequency shunt FET dimming and handles the demanding dynamic loads of adaptive LED matrix-based headlamp systems. Software programmable SPI set points (Precision Peak Current, Controlled Off-Time, and Output Voltage Sense) enable designers to develop a single LED driver solution for multiple load configurations. These solutions can be quickly reconfigured for future LED driver design requirements.

發生意外的錯誤。


有問題嗎？ 請瀏覽幫助中心。
有關特定訂單的問題，請登入您的帳戶。

如有其他問題，請致電800-346-6873或發送郵件至 help@mouser.com 與我們聯絡。