SparkFun Electronics 工具及耗材

結果: 971
選擇 圖像 零件編號 製造商 說明 規格書 供貨情況 定價 (TWD) 基於數量按單價篩選表中結果。 數量 RoHS
SparkFun SparkFun配件 This is an incredibly simple one cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first which is fair since that is what they have been primarily used for. However with this battery holder you will gai 81庫存量
最少: 1
倍數: 1
SparkFun SparkFun配件 This is the same 18650 Lithium Ion Cell that you know and love but now includes pre-attached solder tabs! These round high capacity cells have been mainly used in flashlight type applications but with its capability to be used as a drop-in rechargab
SparkFun SparkFun配件 Snappable Protoboard Protoboard 13庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 Enclosure-Aluminum 120x94.5x34mm 18庫存量
最少: 1
倍數: 1
SparkFun SparkFun配件 Polymer Lithium Ion Battery-110mAh

SparkFun SparkFun配件 Lithium Ion Battery - 850mAh

SparkFun SparkFun配件 If you need some juice this 6Ah Lithium Ion Battery is for you. These are very compact batteries based on Lithium Ion chemistry. This is the highest energy density currently in production. Each cell outputs a nominal 3.7V at 6000mAh! This solid 3 ce
SparkFun SparkFun配件 Teensy Header Kit 66庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 Jumper Wires Premium 4 in M/M-26 AWG 30P 32庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 ESP32 Thing Stackable Header Set 304庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 Large Jumper Wire Kit - 700pcs 19庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 Here is a tiny 4-pin Qwiic 1mm JST connector. This connector mounts to allow you to connect your cable vertically great for tight spaces. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device com 508庫存量
最少: 1
倍數: 1
SparkFun SparkFun配件 This header kit is designed specifically for the larger Teensy 4.1 Teensy 3.6 and Teensy 3.5 development boards offering "stackable" headers with extra-long female pins. When soldered to your Teensy these headers make the board fully compatible w 131庫存量
110在途量
最少: 1
倍數: 1
SparkFun SparkFun配件 This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi Google Coral and NVIDIA Jetson. You can also solder it to Pi HATs that do not have headers on the boa 9庫存量
最少: 1
倍數: 1
SparkFun SparkFun配件 This is a simple and easy to use battery box for powering a micro:bit Board. It accepts two AAA batteries and plugs directly into the board via a JST connector. This version also features an on/off switch making it easy to turn the micro:bit on and o 22庫存量
最少: 1
倍數: 1
SparkFun SparkFun配件 Servo - Generic (Sub-Micro Size) 38庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 Here for all your mechatronic needs is a simple high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min.A standard 3-pin power and control cable is attach 23庫存量
最少: 1
倍數: 1
SparkFun SparkFun配件 No this isn't a tank tread this is a 0.5m long Cable Carrier with 10x15mm bits composing its main body and two screw fasteners at each end for efficient mounting. Sometimes called a "drag chain " each carrier can be used in projects with a large nu 29庫存量
21在途量
最少: 1
倍數: 1

SparkFun SparkFun配件 The DG01D-E is a single hobby motor with a hall speed encoder. This motor requires a voltage between 3-9V has a gearbox ratio of 1:48 and a speed of 90RPM at 4.5V. The voltage between positive and negative is determined according to the power supply 57庫存量
最少: 1
倍數: 1
SparkFun SparkFun配件 Flex Sensor 4.5" 16庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of the st 78庫存量
最少: 1
倍數: 1
SparkFun SparkFun配件 Line Follower Array Follower Array 9庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 Load Cell - 200kg, S-Type (TAS501) 6庫存量
3在途量
最少: 1
倍數: 1

SparkFun SparkFun配件 The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power high-g accelerometer with I2C and SPI interface options. Though not necessarily good at detecting minute changes the H3LIS331DL is great for grueling conditions that normal a 30庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 If you need to add user input without using a button then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.The AT42QT1010 is 55庫存量
最少: 1
倍數: 1